Waterproofing Membrane Supplier in Dubai
Globix Trading supplies liquid-applied and sheet waterproofing membranes to contractors, developers and fit-out companies across Dubai, Sharjah and the wider UAE. We source to specification, quote within 24 hours, and deliver to your site or warehouse.
Waterproofing failures are expensive to put right and almost always traced back to the wrong system being used for the substrate. We supply the full range — SBS and APP modified bituminous sheet, liquid-applied polyurethane, cementitious slurry, and self-adhesive membranes — and we will talk through the substrate and exposure before quoting.
Technical data sheets are available on request for every product we supply, so your consultant can approve the system before material arrives on site.
What We Supply
Technical data sheets available on request for every product.
Bituminous Sheet Membrane
SBS and APP modified torch-on rolls for roofs, podiums and basements. 3mm and 4mm, polyester or glass reinforced.
Liquid-Applied PU Membrane
Single and two-component polyurethane systems for complex detailing, wet areas and exposed roofs.
Cementitious Waterproofing
Two-component flexible slurry for water tanks, basements and retaining walls. Potable-water grades available.
Bituminous Primers
Solvent and water-based primers to prepare concrete substrates before membrane application.
Choosing a Waterproofing Membrane
The right membrane depends on where it sits, whether it is exposed to sun, and how much the structure moves. This is how the main systems compare when we help contractors specify.
| System | Best suited to | Points to check |
|---|---|---|
| Cementitious / acrylic coating | Bathrooms, balconies, planters, water tanks | Flexible grades only for cracking substrates; reinforce corners and joints with mesh or tape. |
| Bituminous sheet (torch-on or self-adhesive) | Podium decks, basements, roofs under screed or tiles | Needs protection from UV and traffic; laps and upstands must be detailed and tested. |
| Liquid polyurethane | Roofs, terraces and complex details with penetrations | Seamless and flexible; UV-stable grades are needed where the membrane stays exposed. |
| Polyurea (spray applied) | Large decks and car parks needing fast return to service | Specialist applicator and equipment required; substrate must be dry and primed. |
To quote a waterproofing package quickly, send the area in square metres, the substrate (concrete, screed or metal), whether the membrane will be exposed or covered, and the delivery location. Request a quote or message us on WhatsApp.
How to Choose and Order Waterproofing
The questions a good specifier answers before a membrane is chosen, written for UAE conditions.
Decide exposed or covered. A membrane left exposed to sun needs a UV-stable system. One buried under screed, tiles or soil can use a cheaper, less UV-resistant type. This single choice removes most options.
Allow for UAE conditions. Strong sun and large day-night temperature swings move roofs and decks. Choose a flexible system and detail the joints and upstands properly, because failures usually start at the details, not the flat area.
Prepare the substrate. It must be sound, clean and cured, free of laitance and oil, and laid to falls so water reaches the drains. Prime where the system requires it, and reinforce corners, drain outlets and penetrations with tape or mesh.
Check water tanks separately. Where the tank holds drinking water, confirm with the consultant that the product is approved for potable water contact before you order.
Test before covering. Flood test the membrane for the period set in the specification before screed, tiles or backfill go over it. Finding a leak afterwards costs far more.
Order the whole package. Membrane, primer, reinforcement tape, protection layer and sealant for upstands should come from compatible systems. If a consultant has approved a brand, tell us and we will quote against it.
Read next: Waterproofing membrane types guide · Primers and bonding agents · Crack injection resins · Expansion joint systems
Construction Chemical Brands We Supply
As a general trading company we source across the UAE market and supply to the brand and specification your project calls for. Brand names are shown for identification of the products we can arrange.
Where It Is Used
Common Questions
Do you supply waterproofing membrane across the whole UAE?
Yes. We deliver to Dubai, Sharjah, Ajman, Abu Dhabi and the Northern Emirates. Delivery is arranged to your site or warehouse once payment is confirmed.
Which membrane should I use for a roof deck?
It depends on exposure, traffic and the substrate. Torch-applied bituminous sheet is common for accessible roofs; liquid-applied PU suits complex detailing. Send us the drawings or the consultant's specification and we will advise.
Can you supply to a specific consultant-approved brand?
Usually yes. We source across the UAE market, so if a brand is specified and available locally we can arrange it. Tell us the brand and grade when you request a quote.
Which waterproofing suits a UAE roof exposed to direct sun?
Use a UV-stable liquid polyurethane or a membrane protected by a screed, tiles or reflective topcoat. Unprotected bituminous membranes degrade faster under sustained UAE heat and sunlight.
Should a waterproofing system be flood tested?
Yes. A ponding test of 24 to 72 hours before covering the membrane is common practice and the cheapest way to find a leak before it is hidden under screed or tiles.
Often Specified Together
Products commonly quoted alongside this one, or see the full chemicals & sealants range.
Surface Primers & Bonding Agents Supplier in the UAE
Concrete primers, SBR and epoxy bonding agents, surface hardeners and curing compounds supplied across the UAE.
Crack Injection Resin Supplier in the UAE
Polyurethane and epoxy crack injection resins, packers and pumps supplied across the UAE for structural and water-stopping repairs.
Expansion Joint Systems Supplier in the UAE
Preformed expansion joint covers, waterstops, joint sealants and filler boards supplied across the UAE for structural movement joints.
Need a Quote?
Send your specification, grade and quantity — we will come back within 24 hours with pricing and availability.