Construction Safety Equipment Supplier in the UAE
One supplier for the PPE, construction chemicals and workwear a UAE site actually runs on — quoted within 24 hours and delivered to site or store.
Construction is the UAE's largest employer of site labour and its most heavily regulated environment for worker protection. Contractors here are buying against three pressures at once: the consultant's specification, the main contractor's HSE audit, and a programme that does not wait for a back-ordered item. Globix Trading supplies against all three — certified PPE, construction chemicals and site workwear from a single quotation, so a site does not run four supplier accounts to stay compliant.
Falls from height remain the dominant cause of serious injury on UAE sites, which is why fall-arrest equipment carries the tightest certification requirements of anything we supply. Full-body harnesses to EN 361, energy-absorbing lanyards to EN 355 and self-retracting lifelines to EN 360 are not interchangeable, and a harness that suits scaffold work is often wrong for a suspended platform. Send us the work method and we will quote the right configuration rather than the cheapest line item.
Heat is the second defining constraint. The UAE's summer midday break restricts outdoor work during the hottest part of the day through the peak months, but the hours either side still run well above comfortable working temperature. That changes what you should be buying: breathable poly-cotton coveralls rather than heavy cotton drill, ventilated helmets, cooling neckwear, and hi-vis in fabrics that do not trap heat. Specifying winter-weight PPE for a Gulf summer is a common and expensive mistake.
Dust is the third. Concrete cutting, grinding and chasing all release respirable crystalline silica, and a general-purpose dust mask is not adequate protection. FFP3 respirators to EN 149 are the correct grade for silica exposure; FFP2 suits general construction dust and insulation work. We will tell you which applies rather than quoting whichever we hold.
On the materials side we supply the consumables that go into the build itself — waterproofing membranes for podiums and basements, tile adhesives and grouts, sealants for movement and perimeter joints, concrete repair mortars and epoxy floor systems. Because we are a general trading company, we source to the consultant's approved brand and grade where one is specified, and offer an equivalent where it is not.
What We Supply
Across all three divisions on a single quotation. Technical data sheets available on request.

Safety Helmets & Hard Hats
Industrial protection helmets to EN 397 with ratchet or textile harness, vented and non-vented, in site colour codes. Chin straps and helmet-mounted accessories available.

Fall Protection Systems
Full-body harnesses to EN 361, shock-absorbing and Y-lanyards to EN 355, self-retracting lifelines to EN 360, vertical lifelines, anchor points and connectors.

Hi-Vis Clothing
Vests, polos, jackets and coveralls with retro-reflective tape for day and night visibility. Class-rated hi-vis for roadworks and plant-traffic areas.

Safety Footwear
S1P and S3 boots and shoes to EN ISO 20345 with 200J toe caps and 1100N puncture-resistant midsoles. Steel and composite, in sizes 38–46.

Waterproofing Membranes
Torch-applied bituminous sheet, liquid-applied polyurethane and cementitious slurry systems for roofs, podiums, basements and wet areas.

Tile Adhesives & Grouts
C1, C2 and C2S1 cementitious adhesives, epoxy adhesives for wet and chemical areas, and flexible grouts for interior and exterior tiling.
Where We Supply
Common Questions
Do you supply to main contractors and subcontractors?
Both. We quote the same way for a subcontractor taking twenty helmets as for a main contractor placing a site-wide PPE order. There is no minimum order value, which is usually the reason smaller subcontractors come to us.
Can you match a consultant-approved specification?
Usually yes. As a general trading company we source across the UAE market rather than carrying one manufacturer's line, so if a brand and grade are named in the specification and available locally, we can arrange it. Send the specification section with your enquiry.
What certification documents do you provide?
Technical data sheets and the relevant EN or ASTM declarations for every item we supply, on request. For PPE we can provide the CE certification reference. Send us the item and we will send the documentation before you commit to the order.
How quickly can you deliver to a site?
Stocked items are typically delivered within one to three working days across Dubai, Sharjah and the Northern Emirates once payment is confirmed. Items sourced to specification depend on market availability — we confirm a realistic date with the quotation rather than after you have ordered.
Related guide: Safety Shoe Markings Explained: S1, S1P, S3 and SRC
Explore the Full Range
PPE Standards Guide
EN codes by hazard, with a free PDF cheat sheet.
Safety Equipment in Abu Dhabi
PPE supplied to Abu Dhabi sites, camps and warehouses.
Safety Equipment
PPE to EN, ANSI and ISO standards across head, eye, hand, foot, respiratory and fall protection.
Chemicals & Sealants
Waterproofing, sealants, tile adhesives, epoxy flooring and concrete repair.
Garments & Workwear
Coveralls, hi-vis, corporate uniforms and branded workwear.
Concrete Repair Mortars
Structural and cosmetic repair mortars for site remediation.
Construction Sealants
Silicone, PU and hybrid sealants for facades and movement joints.
Waterproofing Membranes
Sheet and liquid-applied systems for roofs, podiums and basements.
Need a Quote?
Send your requirement, specification and quantity — we will come back within 24 hours with pricing and availability.