Surface Primers & Bonding Agents Supplier in the UAE
We supply concrete primers, SBR and epoxy bonding agents, surface hardeners and curing compounds — the preparation products that decide whether the finish above them lasts.
Primers and bonding agents are the cheapest line on a materials order and the most common cause of failure when they are skipped. A coating or screed is only as good as its bond to the substrate.
We supply water-based and solvent-based primers, latex and epoxy bonding agents, dust-proofing hardeners and curing compounds for fresh concrete.
What We Supply
Technical data sheets available on request for every product.
Concrete Primers
Water and solvent-based primers for coatings, screeds and membranes.
Epoxy Bonding Agents
Structural bonding agents for new-to-old concrete connections.
SBR Latex Bonding Agents
Styrene-butadiene latex for mortar modification and slurry bond coats.
Curing Compounds
Wax and resin-based curing membranes to control early moisture loss in fresh concrete.
Choosing a Primer or Bonding Agent
Most coating, tiling and repair failures start at the interface. This is how the common primers and bonding agents differ.
| Product | Typical use | Points to check |
|---|---|---|
| SBR or acrylic bonding agent | Bonding new cementitious repairs and toppings to old concrete | Check the open time; the mortar must go on while the bonding coat is still tacky. |
| Epoxy bonding agent | Structural bonding of new concrete to old | Higher bond strength; follow the pot life and recoat window. |
| Penetrating primer | Dusty, porous or absorbent substrates before tiling, render or paint | Reduces suction and binds surface dust; not a repair material. |
| Epoxy moisture barrier | Slabs with high residual moisture before flooring | Check the maximum moisture level stated on the data sheet. |
| Curing compound and surface hardener | New slabs in hot weather | Curing compound slows moisture loss; confirm compatibility with later coatings. |
Send the substrate, the finish that goes on top, the area and the delivery location. We will match the primer to the system so the data sheets agree. Request a quote or message us on WhatsApp.
Construction Chemical Brands We Supply
As a general trading company we source across the UAE market and supply to the brand and specification your project calls for. Brand names are shown for identification of the products we can arrange.
Where It Is Used
Common Questions
Why do I need a bonding agent for a screed?
Without one, a screed laid over cured concrete can debond and hollow out under traffic. An SBR or epoxy bond coat makes the two layers act as one.
What is the difference between a primer and a bonding agent?
A primer seals and stabilises a porous substrate so the next coat does not lose its solvent or water. A bonding agent creates a mechanical and chemical bridge between two layers. Some projects need both.
Do you supply curing compounds for large pours?
Yes, in bulk drums. Tell us the slab area and we will quote the coverage required.
When is a primer needed under tile adhesive?
On dusty, absorbent or very smooth substrates, and on gypsum or old tiles. A primer controls suction and improves bond.
Does a bonding agent replace surface preparation?
No. The surface must still be clean, sound and free of laitance and oil. A bonding agent improves bond but cannot fix a weak substrate.
Often Specified Together
Products commonly quoted alongside this one, or see the full chemicals & sealants range.
Waterproofing Membrane Supplier in Dubai
Liquid-applied and sheet waterproofing membranes supplied across Dubai, Sharjah and the UAE.
Epoxy Flooring Materials Supplier in the UAE
Epoxy floor coatings, self-levelling screeds and primers supplied across the UAE for warehouses, car parks and industrial floors.
Tile Adhesive & Grout Supplier in Dubai
C1, C2 and C2S1 tile adhesives, flexible grouts and backer materials supplied across Dubai and the UAE.
Need a Quote?
Send your specification, grade and quantity — we will come back within 24 hours with pricing and availability.