Crack Injection Resin Supplier in the UAE
We supply polyurethane and epoxy crack injection resins, injection packers, and the accessories needed for structural crack repair and active water stopping across the UAE.
Two very different jobs get called crack injection. Structural bonding of a dormant crack needs a rigid epoxy that restores the section. Stopping active water ingress needs a flexible polyurethane that foams on contact with water and seals the path.
We supply both, along with mechanical and surface packers, sealing paste and the pumps to place them.
What We Supply
Technical data sheets available on request for every product.
PU Injection Resins
Single-component water-reactive foams and flexible gels for active leak sealing.
Epoxy Injection Resins
Low-viscosity structural resins for bonding dormant cracks and restoring section.
Injection Packers
Mechanical steel packers and surface-mounted ports in standard sizes.
Crack Sealing Paste
Fast-set surface sealing paste to contain the resin during injection.
Epoxy or Polyurethane Injection?
The injection resin is chosen by what the crack is doing and what you need it to achieve: bond the structure or stop water.
| Resin | Best suited to | Points to check |
|---|---|---|
| Epoxy injection resin | Dry, stable cracks needing structural bonding | Rigid once cured; not suited to cracks that keep moving or carry running water. |
| Polyurethane injection resin | Leaking or damp cracks and joints | Flexible; hydrophobic grades react with water to seal active leaks. |
| Acrylate gel | Fine leaks in basements, tunnels and tanks | Very low viscosity; used for water-stopping rather than structural repair. |
| Packers and injection pumps | All injection work | Surface-mounted or drill-in packers are chosen by crack width and wall thickness. |
Send the crack width, length, whether it is leaking, wall or slab thickness and the delivery location. We will quote the resin, packers and pump hire or purchase options. Request a quote or message us on WhatsApp.
Construction Chemical Brands We Supply
As a general trading company we source across the UAE market and supply to the brand and specification your project calls for. Brand names are shown for identification of the products we can arrange.
Where It Is Used
Common Questions
Should I use PU or epoxy for a leaking crack?
If water is actively flowing, use a polyurethane — it reacts with water and expands to seal the path. Epoxy is for dry, dormant cracks where the goal is to restore structural strength.
Do you supply the injection pump as well as the resin?
We supply resins, packers and consumables as standard. Pumps can be arranged on request — tell us what you need when you enquire.
What crack width can be injected?
Epoxy systems handle hairline cracks from around 0.2mm upward depending on viscosity. PU foams work on wider and wet cracks. Send the crack width and condition and we will match the product.
Which should I use, epoxy or polyurethane?
Use epoxy to restore the bond across a stable, dry crack. Use polyurethane to stop water or where the crack still moves slightly.
How narrow a crack can be injected?
Fine cracks from roughly 0.2 mm can be injected with low-viscosity resins, while wider voids may need grout. Check the data sheet and the viscosity of the specific resin.
Often Specified Together
Products commonly quoted alongside this one, or see the full chemicals & sealants range.
Concrete Repair Mortar Supplier in Dubai
Cementitious and epoxy concrete repair mortars, rebar primers and bonding agents supplied across Dubai and the UAE.
Waterproofing Membrane Supplier in Dubai
Liquid-applied and sheet waterproofing membranes supplied across Dubai, Sharjah and the UAE.
Expansion Joint Systems Supplier in the UAE
Preformed expansion joint covers, waterstops, joint sealants and filler boards supplied across the UAE for structural movement joints.
Need a Quote?
Send your specification, grade and quantity — we will come back within 24 hours with pricing and availability.