Workwear & Custom Uniform Supplier in the UAE
Ready-stock workwear and custom-branded garments for site crews, hospitality teams, corporate staff, and promotional campaigns.
What We Supply
Choose a category to browse the full range with images and brands, then request a quote.
Coveralls & Boilersuits
Single and two-piece coveralls and boilersuits for site, workshop and maintenance crews.
Trousers & Shorts
Work, holster, service and combat trousers, joggers and shorts.
Work Jackets & Vests
Work jackets, coats, vests and bodywarmers for general site use.
Hi-Vis Workwear
High-visibility vests, jackets, trousers, coveralls and polos with reflective tape.
FR & Welding Workwear
Flame-resistant coveralls, jackets, trousers and shirts for hot work.
Rainwear
Rain jackets, trousers and suits for outdoor and wet-weather work.
Insulated & Thermal Wear
Insulated, softshell and fleece jackets and base layers for cold conditions.
Polo Shirts
Polo shirts in cotton, poly-cotton and performance fabrics, men, women and kids.
T-Shirts
Plain tees in cotton and blends for corporate, event and uniform use.
Sweatshirts & Hoodies
Crew neck, hooded and zip sweatshirts and fleece tops.
Chef & Hospitality Wear
Chef coats, tunics, aprons, kitchen trousers and caps.
Caps & Accessories
Caps, hats and headwear for kitchen and site teams.
Your Logo. Your Brand.
Screen printing, embroidery, and heat transfer branding on most garment types. MOQs apply for custom runs.
Screen Printing
High-quality flat prints for logos, slogans, and branding — ideal for t-shirts, polos, and hi-vis vests.
Embroidery
Premium embroidered logos for formal uniforms, corporate polos, and hospitality attire.
Full Size Runs
XS to 5XL available for bulk corporate and site workwear orders across all garment types.
Product Range & Standards
Coveralls, hi-vis, flame-resistant and corporate workwear specified by fabric weight and certification, with custom branding available on request.
Cotton Coveralls
Premium cotton coveralls, mercerised, sanforized and pre-shrunk, with elasticated back waistband, chest, swing and tool pockets. Standard in petrol blue, navy, khaki, orange, grey and red. Cotton does not melt, which is why it remains standard around hot work.
100% Kingsmill cotton. EN 17353 is enhanced visibility for medium-risk work — it is not hi-vis certification and will not satisfy a site specifying EN ISO 20471.
Plain cotton coverall for general site and workshop wear. No protective certification claimed.
Cotton coverall for general duty. No protective certification claimed.
Poly-Cotton Coveralls
The practical default for UAE conditions — lighter, faster drying and better at holding colour through industrial laundering than pure cotton. Available in single-piece coveralls and two-piece pant-and-shirt sets across a full colour range.
The volume workhorse — polycotton coverall for general site issue. No protective certification claimed, and none should be inferred from the fabric.
Heavier polycotton coverall. No protective certification claimed.
Flame-Resistant Workwear
Flame-resistant coveralls and two-piece sets in inherent and treated fabrics, and antistatic garments for flammable atmospheres. These protect against different hazards — many oil and gas specifications require both certifications on the same garment.
99% cotton with 1% carbon fibre, 210 gsm. Also EN ISO 11611 Class 1 and EN 1149-5. ATPV 9.1 cal/cm². The lightest FR coverall here, which matters in a UAE summer.
Multi-norm: EN ISO 11612 A1+A2 B1 C1 E2 F1, EN ISO 11611 Class 1, EN 1149-5, EN 13034 Type 6. ATPV 16 cal/cm².
99% cotton with 1% carbon fibre and a chemical finish, 280 g. ELIM 12 / ATPV 14 cal/cm². The only Class 2 welding rating in this set.
Dobby ripstop with a carbon grid. Also EN ISO 14116 Index 3, EN 1149-5, EN 13034 Type PB(6), EN 343 Class 3,3, EN ISO 20471 Class 3 and IEC 61482-2 Class 1.
FR antistatic grid shell with FR cotton twill lining. EN 1149-5, EN 13034 Type PB(6), EN 14058, EN 343. Index-level flame protection, not EN ISO 11612 — a different and lower level, so check it against the site requirement.
Disposable Coveralls
SMS and microporous disposable coveralls in Type 5/6 and Type 4/5/6 protection, plus antistatic grades in polyester with carbon thread for paint shops, spare parts handling and electronics work. Sizes M–3XL, supplied by the carton.
1.5 oz SMS, also EN 1073-2 and EN 1149-5. The economy disposable for dust and light splash.
2 oz spunbonded polyethylene with EN 14126 infective agent protection. The B suffix denotes biological protection.
55 g FR SMS. Index 1 is limited flame spread only — it is not EN ISO 11612 and is not a substitute for an FR coverall.
Tyvek with EN 1073-2, EN 1149-5 and EN 14126. The reference disposable for asbestos, pharmaceutical and clean work.
55 gsm PP/PE laminate with an SMMMS breathable back panel. EN 1149-5, EN 1073-2 Class 1, EN ISO 6530 Class 3 of 3.
50 gsm SMS polypropylene, EN 1073-2 Class 1. The economy option in the 3M range.
52 gsm SSMMS polypropylene with EN 1149-5 antistatic and EN 530 Class 2 abrasion.
Hi-Vis Garments
Vests, polos, jackets and coveralls in fluorescent yellow and orange with retro-reflective tape, in mesh and solid fabrics. Cross-back, zipped and multi-pocket styles, with adjustable sizing for shared-use vests.
100% polyester warp knit, 124 gsm, certified after 50 washes. Also RIS 3279 TOM Issue 2 in orange, and ANSI/ISEA 107 Type R/P Class 2.
Kingsmill polycotton 65/35, 7 oz. Also ANSI/ISEA 107 Type R Class 3.
80% polyester / 20% cotton, 280 gsm, Class 3 retained after 50 washes. RIS 3279 TOM Issue 2 in orange, for rail work.
99% cotton with 1% carbon fibre, 330 gsm. Hi-vis and flame resistance in one garment — EN ISO 11611 Class 1 and EN 1149-5 as well.
100% polyester Coolpass with UPF 50+. A certified Class 3 polo rather than a vest over a shirt.
100% polyester tricot, 120 g/m².
Certified hi-vis trousers to complete a Class 3 ensemble with an upper garment.
Welding Protection
Natural and suede split leather jackets, aprons, sleeves, spats and shoe covers with Kevlar stitching, to protect against molten metal splash, sparks and cutting debris. Sizes M to XL, worn over standard workwear.
100% cotton FR finish, 330 g. ELIM 8.3 / ATPV 10.9 cal/cm² to IEC 61482-1-1. The standard welder's coverall.
100% cotton, 330 gsm. Jacket version where a coverall is impractical.
100% cotton, 9.5 oz. Pairs with the BZ13 as a two-piece alternative to the BIZ1.
Class 2 covers heavier spatter and higher radiant heat than Class 1 — specify it for overhead and heavy plate work.
Multi-norm jacket also carrying EN ISO 11612 and IEC 61482-2 Class 1.
Rain & Weather Protection
Heavy-duty PVC-reinforced polyester rain suits and coats with heat-sealed seams, fully waterproof and non-conductive, for outdoor maintenance, marine and monsoon-season site work.
100% polyester tricot, PU coated, 200 g. Water penetration resistance 5,000 mm. The economy waterproof.
Matching trouser, same fabric and rating.
150D stretch polyester with a PU membrane. 20,000 mm water column, 10,000 g/m²/24h breathability — the top of this range on both axes.
300D stretch Oxford with PU membrane. 11,000 mm water column and 50,000 g/m²/24h breathability, with Class 3 hi-vis.
300D Oxford, double PU coated. Also EN 342 for cold — relevant for cold store and night work rather than UAE ambient.
300D Oxford polyester, PU coated, also EN 342 and RIS-3279-TOM.
Chemical Protection Suits
Three-layer double-sided PVC-coated nylon suits for chemical handling and utilities work, supplied as pant-and-shirt sets in sizes S to 4XL.
82 gsm microporous PP laminate with taped seams. Also Type 5B and 6B, EN 1073-2 and EN 1149-5. Taped seams are what take it from Type 4 to Type 3.
Spray-tight Tyvek suit, tested to EN ISO 17491-4 Method B. EN 1073-2, EN 1149-5, EN 14325.
Liquid-tight Tyvek suit — Type 3 means it withstands a pressurised jet, which the 600 Plus does not.
Barrier film laminated to Tyvek, for a wider range of chemicals than Tyvek alone. EN 14325, EN 1073-2.
Tychem F for the most demanding chemical exposure in this range.
PP/PE with taped seams, EN 530 Class 5 abrasion. Also Type 5 and Type 6.
Polos, T-Shirts & Caps
Plain and custom-printed polos and t-shirts in single jersey, cotton and moisture-wicking Coolmax, plus caps, hard hat liners and sun hats. Breathable, lightweight fabrics suited to outdoor work in Gulf summer conditions.
100% cotton in solid colours, 20 singles. Heather, neon and safety shades switch to a 50/50 cotton-polyester blend. 70 colours, S to 5XL.
100% US ring-spun cotton, 30 singles. Softer handle and a closer fit than the 5000 — the one for staff uniform rather than giveaway.
100% US cotton in solids; Sport Grey 90/10, heathers and safety shades 50/50.
100% cotton, white at 160 gsm and colours at 165 gsm. Tubular construction in smaller sizes, side-seamed at 4XL and 5XL.
65% polyester / 35% cotton, white 170 gsm and colours 180 gsm. Polycotton holds its shape through industrial laundering better than pure cotton.
100% pre-shrunk ring-spun cotton, 55 colours, XS to 5XL.
100% pre-shrunk ring-spun cotton, the heavier weight in the same range, 55 colours.
100% pre-shrunk ring-spun combed cotton piqué, 20 colours, XS to 3XL.
100% combed ring-spun cotton, 32 singles, XS to 6XL. The premium blank in this list.
60% combed ring-spun cotton / 40% polyester, 45+ colours.
Round neck tee. Composition and colour range are supplied on enquiry rather than published.
Combed cotton round neck, the heavier of the two.
Moisture-wicking polo.
Polo with UV protection, 12 colours, S to 3XL. Santhome identifies products by family rather than style code.
Anti-microbial finish rated to 20 washes. 5 colours, S to 3XL.
Bio-enzyme finished long-staple cotton, 9 colours, XS to 5XL.
Corporate & Hospitality Uniforms
Formal shirts, trousers and coordinated sets for reception, security and administrative teams, and chef coats, front-of-house and housekeeping sets for hospitality, from ready stock.
Logo Application
Embroidery, screen printing and heat transfer available on request on garments we supply. Send artwork with your enquiry and we will confirm the best application method for the fabric and quantity.
Standards are listed so you can match what we supply against your specification. Technical data sheets and certification references are available on request for every item, before you commit to an order.
Workwear by Application
Coveralls & Workwear
Ready-stock cotton and poly-cotton coveralls, hi-vis garments, rainwear and disposable suits.
FR & Welding Workwear
Flame-resistant and welding coveralls, jackets and trousers to EN ISO 11612 and EN ISO 11611.
Corporate & Hospitality Uniforms
Ready-stock polos, T-shirts and caps with your logo applied.
Workwear & Garment Brands We Supply
As a general trading company we source across the UAE market and supply to the brand and specification your project calls for. Brand names are shown for identification of the products we can arrange.
Need Workwear or Custom Garments?
Share quantity, size run, and branding details — quote within 24 hours.