Epoxy Flooring Materials Supplier in the UAE
We supply two-component epoxy floor coating systems, self-levelling screeds, primers and hardeners for warehouses, car parks, workshops and food-grade facilities across the UAE.
Industrial floors take abuse — forklift traffic, chemical spills, thermal shock from wash-downs. The right epoxy system depends on the loading and the environment, not just the square metre rate. We supply solvent-free, water-based and high-build systems and will match the product to how the floor is actually used.
We can also supply the preparation materials — primers, moisture barriers and repair mortars — so the whole build-up comes from one order.
What We Supply
Technical data sheets available on request for every product.
Epoxy Floor Coatings
Two-component solvent-free and water-based systems in standard and custom colours.
Epoxy Primers & Sealers
Substrate primers, moisture-tolerant barriers and penetrating sealers.
Self-Levelling Screeds
Epoxy and cementitious self-levelling compounds for uneven or damaged substrates.
Anti-Slip & Broadcast Aggregates
Quartz and aluminium oxide broadcast media for slip resistance in wet zones.
Choosing an Epoxy Floor System
Floor performance comes from the build-up, not only the coating. These are the common systems and what each is used for.
| System | Typical use | Points to check |
|---|---|---|
| Thin-film epoxy coating (about 150 to 500 microns) | Storage areas, workshops and light vehicle traffic | Needs a sound, ground and dust-free slab; thin films show substrate defects. |
| Self-levelling epoxy (about 2 to 4 mm) | Warehouses, production floors and showrooms | Gives a seamless finish; add broadcast aggregate where the floor will get wet. |
| Epoxy mortar or heavy-duty screed (about 5 mm and above) | Loading bays, forklift routes and repairs | Best for impact and point loads; plan joint cuts to follow slab joints. |
| Polyurethane-modified or urethane cement systems | Food and beverage areas with hot wash-down | Handles thermal shock better than standard epoxy; check chemical exposure. |
Send the floor area, current substrate condition, traffic type, any chemical or wash-down exposure and the delivery location, and we will quote the full build-up including primer and aggregate. Request a quote or message us on WhatsApp.
Construction Chemical Brands We Supply
As a general trading company we source across the UAE market and supply to the brand and specification your project calls for. Brand names are shown for identification of the products we can arrange.
Where It Is Used
Common Questions
What thickness of epoxy floor do I need?
Light-duty coatings run 300–500 microns; heavy forklift traffic usually needs a 3–5mm self-levelling or screed system. Tell us the traffic type and we will recommend a build-up.
Do you supply anti-slip epoxy for wet areas?
Yes. Broadcast aggregates are added into the coating to create a textured, slip-resistant finish. We supply both the coating and the aggregate.
Can you deliver in bulk for a large floor area?
Yes. Give us the area in square metres and the required build-up and we will quote the full material take-off, including primer and aggregates.
Can epoxy be applied to new concrete?
Most manufacturers require the slab to cure for about 28 days and pass a moisture check before epoxy is applied. Always follow the data sheet for the specific product.
Which floor suits hot wash-down in a kitchen or food plant?
Standard epoxy can soften or crack under repeated hot water. Polyurethane-modified or urethane cement systems are usually specified where thermal shock is expected.
Often Specified Together
Products commonly quoted alongside this one, or see the full chemicals & sealants range.
Surface Primers & Bonding Agents Supplier in the UAE
Concrete primers, SBR and epoxy bonding agents, surface hardeners and curing compounds supplied across the UAE.
Concrete Repair Mortar Supplier in Dubai
Cementitious and epoxy concrete repair mortars, rebar primers and bonding agents supplied across Dubai and the UAE.
Crack Injection Resin Supplier in the UAE
Polyurethane and epoxy crack injection resins, packers and pumps supplied across the UAE for structural and water-stopping repairs.
Need a Quote?
Send your specification, grade and quantity — we will come back within 24 hours with pricing and availability.